• SafaMesh 25 Nominal hole size 25mm x 25mm

    £4.19 Inc VAT

    Molecular aligned Polypropylene mesh. Providing an excellent strength to weight ratio. Nominal hole size 25mm x 25mm. Colour Black. 2 metres wide.

    Add to basketLoading Done
  • Pond Safety Mesh

    SafaMesh 6 Nominal hole size 6mm x 7mm

    £4.19 Inc VAT

    Molecular aligned Polypropylene mesh. Providing an excellent strength to weight ratio. Nominal hole size 6mm x 7mm Colour Black. 2 metres wide.

    Add to basketLoading Done
  • SafaMesh cable tie

    £4.20 Inc VAT

    SafaMesh cable tie to secure the SafaMesh to the SafaDeck. Length 100mm. Pack of 100.

    Add to basketLoading Done
  • Beam Clip Pack Qty 50

    £24.00 Inc VAT

    The beam clip is used to clip the grid to the beam. Normally one beam clip is located in each corner of the grid, meaning on average 4 beam clips are required for each grid. Beam clips are also placed over any join in the beams.

    Add to basketLoading Done
  • Cut End Bumper Pack 50

    £24.00 Inc VAT

    The cut end bumper is used to protect butyl and PVC liners from any cut sections of grid. It has a smooth curved side and an open side. The open side has a wider base and a narrower top. It is used in an upside-down position when placing over the diagonal cut sections of grid….

    Add to basketLoading Done
  • Cut End Support Pack 50

    £24.00 Inc VAT

    The cut end support is used in the rare event when a section of grid cannot be adequately supported by beams on either side. It is placed over a section of grid and a length of support cord is passed through the bottom two holes which is then anchored outside the pond using either a…

    Add to basketLoading Done
  • Floating Beam Clip Pack 25

    £15.00 Inc VAT

    The floating beam clip is used to attach grids to the first and last beams in the pond. It can be used over the ‘star’ configuration in the grid. It is also used to attach any additional support beams to the underside of the grid if required. It is clipped into position using a flat…

    Add to basketLoading Done
  • Grid to Grid Clip Pack 50

    £24.00 Inc VAT

    The grid to grid clip brings together one grid in a lane with its neighbouring grid. They work in pairs and are clipped in between the tabs on the underside of the grid. One grid to grid clip is placed in one direction, the other in the pair in the other direction. When combined in…

    Add to basketLoading Done
  • Beam Cleat Pack 25

    £15.00 Inc VAT

    The beam cleat is used to cap off the end of the support beam. After the beam is cut to length, without the beam cleat it would pose a threat to the pond liner. The beam cleat has a central hole, through which the support cord is passed.

    Add to basketLoading Done
  • Joiner Pack 10

    £9.60 Inc VAT

    The joiner helps position one beam into the next. It is not a load-bearing component. Load is taken by the support leg positioned at the join. The support cord passes through the joiner as shown.

    Add to basketLoading Done
  • Grid Pack 5

    £68.40 Inc VAT

    The grid, made from 30% glass-filled nylon, measures 49cm wide and 59cm long and is 3cm deep. Holes are triangular 14cm x 14cm x 16cm. Beams run underneath the two longest edges and so are spaced 49cm apart. Grids running between two beams form one ‘lane’ of grids.

    Add to basketLoading Done
  • 1.18m Long Beams Powder Coated Pack 2

    £40.56 Inc VAT

    Used to support grids in place. Can be cut to the desired length or extended by use of the beam joiner. Note that the recess in the top of the beam is designed to take the longest edges of each grid or the tabs on the underside of the outermost grids.

    Add to basketLoading Done
  • 1.5m Long Beams Powder Coated Pack 2

    £48.00 Inc VAT

    Used to support grids in place. Can be cut to the desired length or extended by use of the beam joiner. Note that the recess in the top of the beam is designed to take the longest edges of each grid or the tabs on the underside of the outermost grids.

    Add to basketLoading Done
  • 2.3m Long Beams Powder Coated Pack 2

    £61.20 Inc VAT

    Used to support grids in place. Can be cut to the desired length or extended by use of the beam joiner. Note that the recess in the top of the beam is designed to take the longest edges of each grid or the tabs on the underside of the outermost grids.

    Add to basketLoading Done
  • 2.684m Long Beams Powder Coated Pack 2

    £70.42 Inc VAT

    Used to support grids in place. Can be cut to the desired length or extended by use of the beam joiner. Note that the recess in the top of the beam is designed to take the longest edges of each grid or the tabs on the underside of the outermost grids.

    Add to basketLoading Done
  • 1m Leg Pack of 10

    £25.80 Inc VAT

    The picture shows the leg being cut to length by tree loppers. Legs are supplied in 1 metre lengths, which is the deepest pond that can be protected without a special order being placed. A leg should be placed approximately every 1 metre along each beam and preferably at each end of the beam and…

    Add to basketLoading Done